Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Surplus Equipment for a Pouch Filling Line
Auction dates
Starts:
Dec 10, 2025 10:00 AM CT
Ends from:
Dec 17, 2025 10:00 AM CT
Viewing dates
By appointment only
|
Auction currency
|
USD |
|
Buyer's premium
|
18 % |
|
Sales tax
|
7 % |
|
Accepted cards
|
There are 75 lots within this auction
Refine results
Filter by
Primary Category
Category
Brand
Item Type
State/Province
Town/City
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
This auction will have an exlusive rigger for the equipment located in Paris, Tx. Please contact the Rigging team with questions concerning rigging and loading of the equipment.
R.W. Cox, Inc.
Shawn Warner
swarner@rwcoxinc.com
(903) 249-7786
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Varo Sterilizer System System was installed but never operated Product last ran: Baby food, primarily pureed without stabilizer Process: 500L Varo/DCI HPT tank skids 12 gpm feed rate to filling line Vacuum induct into the Varo/DCI process tanks Pasteurize to 198°F in a Varo/DCI process tank. Hold for 5 minutes Cool to 185°F for filling Transfer to filler via Ampco positive displacement pump VARO HPT Skid for a 12 GPM system Batch processing (500 liter batches) Retention of natural and vivid product colors, textures and flavors Ability to temporarily halt product without product loss Horizontal cooker with a double jacket for heating and cooling of the product (steam and water) Temperature: 289° F Volume of one batch: max. 500Lper minute Equipped with an agitator, which allows removal of the product from the inner walls of the cooker (PEEK scraper) and allows rapid heating and cooling of the product (coil to be used with steam/ hot and cold water). The speed of rotation of the agitator is adjustable between 6 and 16 rpm. 3.2 bar/46.5 psi over-pressure and vacuum. Manway cover will include a safety proxy switches. ASME certified rupture disc with sensor. Vent assembly for high/ low flow. Level sensor to indicate tank level contents. All contact surfaces are stainless steel SA-240 316L and finished to 30Ra All other is made from stainless steel SA-240 304, except certain components such as gear, bearings, etc Insulation of vessel: 2 inch fiber glass and covered with 12 gauge 304 stainless steel. End pieces have no insulation. Design pressure: Tank 47psi at 290°F Jacket 65psi @ 290°F Utility Requirements needed on site: Steam: Clean saturated 3 bar/43.5 psi (g), 143C/ 289°F / capacity 1200 kg/hr 429 gal/hr Cooling water: max 15 C/ 59°F, 30m3/ hour/ 7925 gal /hr Compressed air: 6 bar/87psi Sterile air: 2 bar/29psi Chart recorder panel and Honeywell recorders
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Varo Sterilizer System System was installed but never operated Product last ran: Baby food, primarily pureed without stabilizer Process: 500L Varo/DCI HPT tank skids 12 gpm feed rate to filling line Vacuum induct into the Varo/DCI process tanks Pasteurize to 198°F in a Varo/DCI process tank. Hold for 5 minutes Cool to 185°F for filling Transfer to filler via Ampco positive displacement pump VARO HPT Skid for a 12 GPM system Batch processing (500 liter batches) Retention of natural and vivid product colors, textures and flavors Ability to temporarily halt product without product loss Horizontal cooker with a double jacket for heating and cooling of the product (steam and water) Temperature: 289° F Volume of one batch: max. 500Lper minute Equipped with an agitator, which allows removal of the product from the inner walls of the cooker (PEEK scraper) and allows rapid heating and cooling of the product (coil to be used with steam/ hot and cold water). The speed of rotation of the agitator is adjustable between 6 and 16 rpm. 3.2 bar/46.5 psi over-pressure and vacuum. Manway cover will include a safety proxy switches. ASME certified rupture disc with sensor. Vent assembly for high/ low flow. Level sensor to indicate tank level contents. All contact surfaces are stainless steel SA-240 316L and finished to 30Ra All other is made from stainless steel SA-240 304, except certain components such as gear, bearings, etc Insulation of vessel: 2 inch fiber glass and covered with 12 gauge 304 stainless steel. End pieces have no insulation. Design pressure: Tank 47psi at 290°F Jacket 65psi @ 290°F Utility Requirements needed on site: Steam: Clean saturated 3 bar/43.5 psi (g), 143C/ 289°F / capacity 1200 kg/hr 429 gal/hr Cooling water: max 15 C/ 59°F, 30m3/ hour/ 7925 gal /hr Compressed air: 6 bar/87psi Sterile air: 2 bar/29psi Chart recorder panel and Honeywell recorders
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Varo Sterilizer System System was installed but never operated Product last ran: Baby food, primarily pureed without stabilizer Process: 500L Varo/DCI HPT tank skids 12 gpm feed rate to filling line Vacuum induct into the Varo/DCI process tanks Pasteurize to 198°F in a Varo/DCI process tank. Hold for 5 minutes Cool to 185°F for filling Transfer to filler via Ampco positive displacement pump VARO HPT Skid for a 12 GPM system Batch processing (500 liter batches) Retention of natural and vivid product colors, textures and flavors Ability to temporarily halt product without product loss Horizontal cooker with a double jacket for heating and cooling of the product (steam and water) Temperature: 289° F Volume of one batch: max. 500Lper minute Equipped with an agitator, which allows removal of the product from the inner walls of the cooker (PEEK scraper) and allows rapid heating and cooling of the product (coil to be used with steam/ hot and cold water). The speed of rotation of the agitator is adjustable between 6 and 16 rpm. 3.2 bar/46.5 psi over-pressure and vacuum. Manway cover will include a safety proxy switches. ASME certified rupture disc with sensor. Vent assembly for high/ low flow. Level sensor to indicate tank level contents. All contact surfaces are stainless steel SA-240 316L and finished to 30Ra All other is made from stainless steel SA-240 304, except certain components such as gear, bearings, etc Insulation of vessel: 2 inch fiber glass and covered with 12 gauge 304 stainless steel. End pieces have no insulation. Design pressure: Tank 47psi at 290°F Jacket 65psi @ 290°F Utility Requirements needed on site: Steam: Clean saturated 3 bar/43.5 psi (g), 143C/ 289°F / capacity 1200 kg/hr 429 gal/hr Cooling water: max 15 C/ 59°F, 30m3/ hour/ 7925 gal /hr Compressed air: 6 bar/87psi Sterile air: 2 bar/29psi Chart recorder panel and Honeywell recorders
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Varo Sterilizer System System was installed but never operated Product last ran: Baby food, primarily pureed without stabilizer Process: 500L Varo/DCI HPT tank skids 12 gpm feed rate to filling line Vacuum induct into the Varo/DCI process tanks Pasteurize to 198°F in a Varo/DCI process tank. Hold for 5 minutes Cool to 185°F for filling Transfer to filler via Ampco positive displacement pump VARO HPT Skid for a 12 GPM system Batch processing (500 liter batches) Retention of natural and vivid product colors, textures and flavors Ability to temporarily halt product without product loss Horizontal cooker with a double jacket for heating and cooling of the product (steam and water) Temperature: 289° F Volume of one batch: max. 500Lper minute Equipped with an agitator, which allows removal of the product from the inner walls of the cooker (PEEK scraper) and allows rapid heating and cooling of the product (coil to be used with steam/ hot and cold water). The speed of rotation of the agitator is adjustable between 6 and 16 rpm. 3.2 bar/46.5 psi over-pressure and vacuum. Manway cover will include a safety proxy switches. ASME certified rupture disc with sensor. Vent assembly for high/ low flow. Level sensor to indicate tank level contents. All contact surfaces are stainless steel SA-240 316L and finished to 30Ra All other is made from stainless steel SA-240 304, except certain components such as gear, bearings, etc Insulation of vessel: 2 inch fiber glass and covered with 12 gauge 304 stainless steel. End pieces have no insulation. Design pressure: Tank 47psi at 290°F Jacket 65psi @ 290°F Utility Requirements needed on site: Steam: Clean saturated 3 bar/43.5 psi (g), 143C/ 289°F / capacity 1200 kg/hr 429 gal/hr Cooling water: max 15 C/ 59°F, 30m3/ hour/ 7925 gal /hr Compressed air: 6 bar/87psi Sterile air: 2 bar/29psi Chart recorder panel and Honeywell recorders
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Karl Schnell Emulsifier FL 225 DK Type 187 : Capacity for fine emulsion: up to 7000 kg per hour depending on viscocity and cutting head Single discharge screw: Diameter: 360 mm Thickness of flights: 4 mm Pitch: 300 mm 15-8-12 Roto-Plate cutting system Outlet pipe diameter: 100 mm Temperature sensor 250 horsepower emulsification motor Screw feed hopper screw diameter: 360 mm thickness of flights: 4 mm pitch: 300 mm Electrical: Volts: 480 Frequency: 60 Hz Phase 3 Stainless steel construction Model: FL225 DK Type 187
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Karl Schnell Emulsifier FL 225 DK Type 187 : Capacity for fine emulsion: up to 7000 kg per hour depending on viscocity and cutting head Single discharge screw: Diameter: 360 mm Thickness of flights: 4 mm Pitch: 300 mm 15-8-12 Roto-Plate cutting system Outlet pipe diameter: 100 mm Temperature sensor 250 horsepower emulsification motor Screw feed hopper screw diameter: 360 mm thickness of flights: 4 mm pitch: 300 mm Electrical: Volts: 480 Frequency: 60 Hz Phase 3 Stainless steel construction Model: FL225 DK Type 187
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 410 Gallon Stainless Steel Mix Tank with: Capacity: 410 gallons Dish top, cone bottom Insulated Top mounted hinged manway Agitation: Single shaft (2) 3 blade turbine mixer Bottom sweep blade 36 inch sidewall baffle Various inlets and fittings Bottom center discharge: 3 inches Motor: 7.5 hp 41 rpm 316 stainless steel construction mounted on 4 legs
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 360 Gallon Stainless Steel Mix Tank with: Capacity: 360 gallons Dish top, cone bottom Insulated Top mounted hinged manway Agitation: Single shaft (2) 3 blade turbine mixer Bottom angled kicker blade Side sweep Bottom sweep Various inlets and fittings Bottom center discharge: 3 inches 316L stainless steel construction Motor: 7.5 horsepower Electrical: 230/460 volts, 60 hertz, 3 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 360 Gallon Stainless Steel Mix Tank with: Capacity: 360 gallons Dish top, cone bottom Insulated Top mounted hinged manway Agitation: Single shaft (2) 3 blade turbine mixer Bottom angled kicker blade Side sweep Bottom sweep Various inlets and fittings Bottom center discharge: 3 inches 316L stainless steel construction Motor: 7.5 horsepower Electrical: 230/460 volts, 60 hertz, 3 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 360 Gallon Stainless Steel Mix Tank: Capacity: 360 gallons Dish top, cone bottom Insulated Top mounted hinged manway Agitation: Single shaft (2) 3 blade turbine mixer Bottom angled kicker blade Side sweep Bottom sweep Various inlets and fittings Bottom center discharge: 3 inches 316L stainless steel construction Motor: 7.5 horsepower Electrical: 230/460 volts, 60 hertz, 3 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 360 Gallon Stainless Steel Mix Tank with: Capacity: 360 gallons Dish top, cone bottom Insulated Top mounted hinged manway Agitation: Single shaft (2) 3 blade turbine mixer Bottom angled kicker blade Side sweep Bottom sweep Various inlets and fittings Bottom center discharge: 3 inches 316L stainless steel construction Motor: 7.5 horsepower Electrical: 230/460 volts, 60 hertz, 3 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Loss In Weight Feeder and Product Hopper with: Feed rate: 4.5-80 pounds per minute Hopper diameter: 40 inches Infeed diameter: 8 inches Discharge diameter: 6.5 inches Stainless steel conical hopper Washdown motor: 2 hp 1720 rpm Electrical: 208-230/460 volts, 60 hertz, 3 phase Model: Loss In Weight Feeder
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Loss In Weight Feeder and Product Hopper with: Feed rate: 4.5-80 pounds per minute Hopper diameter: 40 inches Infeed diameter: 8 inches Discharge diameter: 6.5 inches Stainless steel conical hopper Washdown motor: 2 hp 1720 rpm Electrical: 208-230/460 volts, 60 hertz, 3 phase Model: Loss In Weight Feeder
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used JBF 150 Gallon Insulated Stainless Steel Mix Tank with: Capacity: 150 gallons Pitch bottom Insulated Agitation: Single shaft (2) 3 blade turbine mixer Top mounted hinged manway CIP spray ball Various inlets and fittings Discharge outlet: Side bottom Diameter: 1.5 inches Top mounted motor: 3 hp 36 rpm 316 stainless steel construction mounted on 3 legs
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Tote 15 Cu Ft Stainless Steel Product Hopper with: Hopper capacity: 15 cubic feet Infeed diameter: 10 inches Discharge diameter: 8 inches Butterfly valve discharge Conical bottom Removable lid Rubber cap cover on top and bottom Stainless steel construction Model: Tote - 15 Cu Ft
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Tote 15 Cu Ft Stainless Steel Product Hopper with: Hopper capacity: 15 cubic feet Infeed diameter: 10 inches Discharge diameter: 8 inches Butterfly valve discharge Conical bottom Removable lid Rubber cap cover on top and bottom Stainless steel construction Model: Tote - 15 Cu Ft
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Tote 15 CU Ft Stainless Steel Product Hopper with: Hopper capacity: 15 cubic feet Infeed diameter: 10 inches Discharge diameter: 8 inches Butterfly valve discharge Conical bottom Removable lid Rubber cap cover on top and bottom Stainless steel construction Model: Tote - 15 Cu Ft
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Tote 6 Cu Ft Stainless Steel Product Hopper with: Hopper capacity: 6 cubic feet Infeed diameter: 10 inches Discharge diameter: 8 inches Butterfly valve discharge Conical bottom Removable lid Rubber cap cover on top and bottom Stainless steel construction Model: Tote - 6 Cu Ft
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Tote 6 Cu Ft Stainless Steel Product Hopper with: Hopper capacity: 6 cubic feet Infeed diameter: 10 inches Discharge diameter: 8 inches Butterfly valve discharge Conical bottom Removable lid Rubber cap cover on top and bottom Stainless steel construction Model: Tote - 6 Cu Ft
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used PPS Tote 6 Cu Ft Stainless Steel Product Hopper with: Hopper capacity: 6 cubic feet Infeed diameter: 10 inches Discharge diameter: 8 inches Butterfly valve discharge Conical bottom Removable lid Rubber cap cover on top and bottom Stainless steel construction Model: Tote - 6 Cu Ft
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
New Fenco spiral pasteurizer and cooling systems:
Output: Up to 400 pouches per minute, depending on application
Air pasteurizing system with holding:
Pouch position into belt: 4 pieces across (side by side) |□□□□|
Pouch max dimensions: (L) 140 x (W) 84 x (H) 40 mm
Pasteurizer holds filled pouches at 192°F (core temperature) for 5 minutes
Air temperature inside: Up to 220°F
Primary Thermal Fluid: steam at max 6 bar (min 3 bar)
SPIRAL design and technical data:
Belt width: approximately 800 mm
Drum diameter: 4000 mm
Number of drums: 1
Number of tiers: 8
Tier pitch: 150 mm approx.
In feed height: 1900 ±100 mm
Out feed height: 900 ±100 mm
Cabin max height: 10 feet
Air cooling system:
Cooler cools down the pouches to 90°F (core temperature)
Dwell time: 20 minutes (adjustable)
Air cooling temperature: 40°F (adjustable)
Primary Thermal fluid: chilled water between 28°F–32°F
SPIRAL design and technical data:
Belt width: ~800 mm
Drum diameter: 5000 mm
Number of drum: 1
Number of tiers: 24
Tier pitch: 150 mm approx.
In feed height: 3600 ±100 mm
Out feed height: 900 ±100 mm
Cabin max height: 15 feet
Pouch accumulation:
To collect the pouches in case of any stoppages of the secondary packaging, working with logic FIFO (First in First out). Buffer – accumulation capacity: ~ 7 minutes (±10% tolerance depending on the pouch handling conditions) composed of:
Stailess steel frame with sliding guides with low friction coefficient plastic material
Adjustable feet
Plastic flexible belt composed with modular belt type food grade in plastic material. The belt allows for good product support and high air cross-flow
2 POUCH ALIGNERS AND ACCELERATING BELTS
To increase the interspace between the rows due to the high speed of the filler (25-26 m/min) vs the lower speed of the secondary packaging (15-16 m/min). One system is posizioned just after the pouch filler, the second one just before the secondary packaging input. The system is totally automatic and fully equipped of sensors for a perfect pouch handling. Composed of:
Stailess steel frame with sliding guides with low friction coefficient plastic material
Adjustable feet
Plastic flexible belt composed with modular belt type food grade in plastic material.The belt allows for good product support and high air cross-flow.
Systems are designed to be in an insulated room. None of the insulation panels are included in the system.
Photos are representative, screenshots of unit drawings included
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Tote Dump and Auger System Never Installed MTC hydraulic tote dumper: 2000 pound capacity Discharge angle: stop tube and set at 45-degree dump angle 5 horsepower motor 5gpm hydraulic power unit Insulated hopper with cluster breakers Swing arm screw auger discharge Weigh belt Stainless steel mezzanine with guarding Electrical: Volts: 460 Frequency: 60 Hz Phase 3 All stainless steel construction
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Tote Dump and Auger System Never Installed MTC hydraulic tote dumper: 2000 pound capacity Discharge angle: stop tube and set at 45-degree dump angle 5 horsepower motor 5gpm hydraulic power unit Insulated hopper with cluster breakers Swing arm screw auger discharge Weigh belt Stainless steel mezzanine with guarding Electrical: Volts: 460 Frequency: 60 Hz Phase 3 All stainless steel construction
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Modern Packaging Cup Filler and Case Packer Line with: Modern Packaging Straight Line Inline Cup Filler Output: up to 160 cups per minute (depending on product) currently set for 75 cups per minute 3 Lanes Current change part set up: 62 plates Cup holes: 5 1/2 inches x 3 1/4 inches Plate size: 21 3/4 inches x 6 inches 24 inch spacing width Operation Panel AB Panel View Plus 1000 Cup Loading 32 inches long x 17 inches tall Cup Dispenser 16 inch tall magazine 25 inch tall refeed magazine Filler Driven by (2) AB Kinetix Series A 8.2 HP Servo Motors (6) Top Flo Automated Flow Control Valves 2 inch diameter piping (2) drip pans: 6 inches wide x 29 inches long (1) bottom drip container Temperature gauge Film Cover Driven by (1) AB Kintix Series A 2 Horsepower Servo Motor Web width: 26 1/2 inches wide Film Cutter Driven by (1) AB Kinetix Series A 5.5 HP Servo Motor 5 inches x 6.5 inches Heat Sealer 5 inch diameter Cup Lid Dispenser 9 1/2 inches tall Refeed dispenser: 42 inches tall Plunger Driven by (6) Bimbass SS Pistons FDA approved Double acting Grease lubricated Discharge conveyor: Shuttleworth Variable frequency driven 11 1/2 inches wide x 78 inches long x 40 1/2 inches tall Overall dimensions: 68 inches wide x 25 feet long Moduline Case Packer Output: up to 30 cases per minute (depending on product) Feeds, folds, and glues cardboard blanks. Fills cardboard trays with 3 or 12 cups. Cardboard trays are fed manual into a magazine, a handling module and cup gripper are used to transport the filled cups through 3 lanes. Stoppers and an end ensure the cups are supplied properly. Rockwell Allen Bradley controls Types of tray/case: open trays, wraparound trays and cases, trays with attacked or separate lids, shelf-ready display trays Current lid dimensions: 145 millimeters long x 96 millimeters wide x 7 millimeters tall Current dimensions of cup: 144 millimeters long x 94 millimeters wide x 77 millimeters tall Size of tray/case: Continuously adjustable Length: 120 millimeters to 460 millimeters (with change parts) Width: 90 millimeters to 300 millimeters (with change parts) Height: 80 millimeters to 300 millimeters (with change parts) Stainless Steel Conveyor 360 degrees Infeed: 15 feet Outfeed: 16 feet Conveyor height: 44 inches from floor 3 lanes: 3 inches, 3 1/2 inches, 3 inches Emergency stop Belt not included Model: Moduline 2.0 Skidding, Rigging, and Loading Fee: $4098.80
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used SchurStar Packaging System with: Designed for opening, filling, and sealing pre-made SchurStar box bags Funneling system compatible with single drop scale Low drop height for gentle product handling Production output rate: up to 80 bags per minute depending on size Highly flexible machine capable of running a wide range of bag sizes: Minimum bag dimensions: 4 width x 2 depth x 6 height (inches) Maximum bag dimensions: 7 width x 6.3 depth x 15.7 height (inches) Safety upgrades to achieve Cat 3 PLD safety rating Intermittent operating mode Allen Bradley controls with PanelView Plus HMI Length of filling section: 118 inches Stepless adjustable bag opening between 2.3 to 4.7 inches Chain system to open, feed, and close the bags Height adjustable flat belt conveyor for outfeed of finished bags Out of bag alert photocell Bags can be manually filled with foot pedal for start/stop Mounted colored light system Set up with double folded and glued top closure: Can be modified to simple seal and trim Air supply: 100 pounds per square inch at 7.7 cubic feet per minute Electricals: 3 phase/ 480 voltage / 60 hertz / 10 amperage ***No scale included*** ***Needs glue unit*** Model: 2060-C Skidding, Rigging, and Loading Fee: $1754.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Breddo Liquefier Blender with: Capacity: 300 gallons MAWP: 100 PSI @ 190°F Heating medium: Water Flanged discharge diameter: 3.5 inches Bottom-center discharge Manway diameter: 20 inches Side inlet diameter (3): 2 inches Mounted on adjustable-height feet Overall dimensions (inches): Length: 53.5 Width: 53.75 Height: 85 Motor HP: 37.5 Motor electrical: 575 V, 60 Hz, 37.6 A Model: LDTW Skidding, Rigging, and Loading Fee: $183.70
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used U.S. Filter Liquid Single Pass Reverse Osmosis Unit with: 80 series Product flow: 32 gallons per minute Feed flow: 43 gallons per minute Reject flow: 16 gallons per minute Recirc flow: 5 gallons per minute Overall dimensions: Length: 160 inches Width: 48 inches Height: 78 inches Motor horsepower: 20 Electrical requirements: 480 volts/ 60 hertz/ 3 phase Model: 83-230-BN Skidding, Rigging, and Loading Fee: $394.30
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Shaffer Horizontal Roller Bar Dough Mixer with: Style: Triple roller bar agitation Horizontal design Mixing capacity: 1600 pounds Jacket rating: maximum 125 PSI Roller diameter: 3 inches Chamber dimensions: 64 width x 41 depth (inches) Approximate infeed/discharge height: 55 inches Overall dimensions: 80 length x 98 width 113 height Allen Bradley touch screen controls Stainless steel construction Motor: 100 hp Electrical: 3 phase, 60 hertz, 480 volts, 250 amps Last application: chilled dough on a 5 minute cycle Model: 1600 Skidding, Rigging, and Loading Fee: $780.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Peerless 9SD Single Sigma Arm Mixer with: Bowl volume: 66 cubic feet Mix capacity: 2,800 pounds 100/50 horsepower motor Agitator speeds: 20 and 40 rpm Stainless steel: Bowl sheet Bowl ends Canopy H.D. water jacket Agitator and shaft Housings and end doors Drip pan Ingredient door Safety switches on end doors Double automatic plug - type timers Electrical digital thermometer Dust tight electrical enclosure Automatic chain oiler Water jacket temperature controls Mix by time or by temperature Electricals: 460V/3 phase/60 hz Model: 9SD Skidding, Rigging, and Loading Fee: $403.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Peerless Single Sigma Arm Mixer with: Bowl volume: 66 cubic feet Mix capacity: 2,800 pounds 100/50 horsepower motor Agitator speeds: 20 and 40 rpm Stainless steel: Bowl sheet Bowl ends Canopy H.D. water jacket Agitator and shaft Housings and end doors Drip pan Ingredient door Safety switches on end doors Double automatic plug - type timers Electrical digital thermometer Dust tight electrical enclosure Automatic chain oiler Water jacket temperature controls Mix by time or by temperature Electricals: 3 Phase, 60 Hz, 460 Volts Model: SD9
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
The KM Grandpack 12 Basket Static Steam Retort with Manual Loading is a high-performance, reliable solution for food processing and preservation. Designed for optimal heat distribution and consistent results, this retort ensures product quality while maximizing operational efficiency. With a manual loading system, it offers flexibility and ease of use, making it an ideal choice for medium to large-scale production. Built with durable materials and advanced technology, the Grandpack 12 provides excellent value for businesses seeking a cost-effective and dependable retort to meet their steam sterilization needs. Used KM Grand Pack Retort with: Style: Static Steam Capacity: 12 baskets Pressure rating: MAWP: 43.5 PSI at 302° F (300 kPa at 150° C) MDMT: 32° F at 43.5 PSI (0° C at 300 kPa) Basket dimensions (inches): Length: 40 Width: 32 Height: 27.5 Chamber dimensions: Length: 41 feet Diameter: 48 inches Overall dimensions: Length: 44 feet Width: 54 inches Height: 54 inches Infeed: 2 Doors, Manual Swing Door Basket “Roller” rails with double stainless steel chain no. 80 and gear motor drive 3.0 HP for basket loading/unloading Double door locking system for safety once vessel has pressure inside Insulation: Thermal insulation 50 mm thick by rockwool 80K and mirror polished stainless steel cladding 0.7 mm thick. Block and bleed valves for air and water Sight glass with sensors for water level control Steam valve: brand "Spirax Sarco", type LE33 with body in cast iron Compressed Air Valve: brand "OMAL" Safety Valve: Brand "ARI" x 2 set (ASME U-stamp) Pressure Gauge: pressure guage in stainless steel cage 0-6 Bars Vessel Pressure Sensor: brand "ESI" Model "GS4200" MIG Thermometer: brand "Taylor" ,Scale 75-135 C. Digital Thermometer: brand "Wahl" online Circular Chart Recorder: brand "Honeywell" Model "DR4500AT" , with 1 pen for temperature recording ASME: ASME U-Stamp Certificate with National Board No. Registration to meet pressure vessel regulation in GA including engineering, manufacturing, testing, Inspection to ASME Section VIII, Division I, Edition 2021. Control system: Allen Bradley programmable logical controller (PLC) Model Micrologix 1400 for fully automatic operation Construction: stainless steel SUS 304 6mm thick Electrical: Electrical: Operating requirements: 3 phase, 60 hertz, 480 volts Control voltage: 120 volts (transformer included in control panel) Signal voltage: 24vdc (power supply included in control panel) Last application: Tuna cans at a 5, 7, and 12 ounce weight. Typically cycle was 2 hours and 45 minutes. 4 pound product was also ran on this a 5 + hour cycle. Model: KM-1212SDS Skidding, Rigging, and Loading Fee: $3664.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Feldmeier Mix Tank with: Capacity: 150 gallons Jacketed MDMT: -20 degrees Fahrenheit at 150 PSI MAWP: 150 PSI at 350 degrees Fahrenheit MOC shell: 316L MOC jacket: 304 National Board Number: 7463 Triple motion mixing: Side scrape/sweep Blade Emulsifier Motors: 5 horsepower 5 horsepower 10 horsepower (2) section hinged lid Grate Jacket infeed/outfeed diameters: 2.25 inches Side outfeed: (2) 1.75 inch diameter Bottom center outlet: 1.875 inches Pneumatic butterfly outlet valve Skidding, Rigging, and Loading Fee: $435.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Nalco XL-3L-4H Nitrate Removal System with: (4) Reverse Osmosis nitrogen removal chambers: Type: code line pressure vessels Length: 144 inches Diameter: 8 inches (approximately) Maximum operating pressure: 300 PSI Minimum operating temperature: 20°F Maximum operating temperature: 120° F Holding single wall tank capacity: 55 gallons Tank internal dimensions (inches): Length: 24 Width: 24 Height: 24 Shelco 5F0S4-CIW-R cartridge filter: Maximum operation pressure: 150 PSI Inlet and outlet connections: 2 inches Grandfous servo pump: 15 horsepower Liquid removal pump: 5 horsepower centrifugal pump Recirculation flow meter Overall dimensions (inches): Length: 144 Width: 52 Height: 80 Holding tank overall dimensions (inches): Length: 24 Width: 24 Height: 49 Unit mounted on frame Electrical requirements: 3 phase, 60 hertz, 460 volts Last application: cheese facility Model: XL-3L-4H Skidding, Rigging, and Loading Fee: $378.10
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used APV Homogenizer with: Rated output capacity: 500 liters per hour (depending on application) Inlet pressure: Low speed/viscosity: 4 bar High speed/viscosity: 10 bar Maximum homogenizing pressure: 1000 bar Cooling water volume: Eccentric oil: 90 liters per hour Motor: 1170 rpm Electrical: 460 volts, 60 hertz, 3 phase Stainless steel construction Model: Blue-Top Skidding, Rigging, and Loading Fee: $194.80
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulated tank Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $1786.70
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulated tank Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulation Capacity: 2113 gallons Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches ACC actuator and valve: Electrical requirements: Voltage: 24VDC Frequency: 24VDC Phase: 1 Rosemount temperature probe and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Model: 8 Cubic Meter Skidding, Rigging, and Loading Fee: $920.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 300-Gallon Stainless Steel Mix Tank with: Capacity: 300 gallons Type: Single wall Tank dimensions: Diameter: 42 inches Straight wall height: 52.25 inches Depth: 55 inches Overall dimensions: Length: 44 Width: 57 Height: 83 2 side inlets Diameters: 2 inches Discharge: Center-bottom Diameter: 2 inches Discharge height: 12 inches Mounted on casters Four pipe-style legs Mix-Mor DA-2 direct drive mixer with propeller agitation Construction: Stainless steel Skidding, Rigging, and Loading Fee: $142.10
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Carry Brewtech Storage Tank with: Capacity: approximately 1250 gallons (5000 liters) Tank dimensions: Diameter: approximately 78 inches Straight side height: 89 inches Insulation thickness: approximately 2 inches Side bottom port diameters: (2): 2.5 inches (1): 2 inches Bottom center discharge diameter: 2.5 inches Top ports: 3 Top mounted manway diameter: approximately 28 inches Leg height: 36 inches Overall dimensions: Diameter: approximately 78 inches Height: approximately 136 inches Stainless steel construction Previously used in brewery application Model: Bright Beer Skidding, Rigging, and Loading Fee: $308.20
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Pfening Vibratory Pressure Sifter with: Screen diameter: 27.5 inches 2 nylon sifting screens 2 horsepower motor for sifter vibration Infeed diameter: 3.625 inches Outfeed height: 42 inches Outfeed diameter: 4 inches Stainless steel contact parts Skidding, Rigging, and Loading Fee: $140.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Legion Stainless Steel Kettle with: Capacity: approximately 30 gallons Kettle diameter: 23 inches Two-Thirds jacketed Overall dimensions (inches): Length: 31 Width: 25.5 Height: 50 Discharge height: 15 inches Bottom-side discharge Dish-style Lightnin XDA-33 agitator: 0.3 HP Pneumatic 1750 max RPM 0.5 inch shaft diameter Stainless steel construction Model: unknown Skidding, Rigging, and Loading Fee: $80.70
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used York Screw Compressor with: Maximum crankcase pressure: 363 PSIG Maximum design pressure: 609 PSIG Frick Quantum HD Retrofit touch screen HMI Approximate overall dimensions: Length: 125 inches Width: 65 inches Height: 72 inches Largest motor: 150 horsepower Electrical: 3 Phase, 60 Hz, 460 Volts Model: SAB 128 HF Skidding, Rigging, and Loading Fee: $492.90
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Hopper with: Capacity: up to 45,000 pounds, depending on product and application Painted steel construction Previously used to house flour in food manufacturing application Skidding, Rigging, and Loading Fee: $90.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Experience culinary precision with the Groen PT40 Kettle featuring a dynamic propeller agitator. Crafted for culinary artisans and industrial kitchens alike, this kettle excels in efficiently blending, cooking, and simmering large volumes of soups, sauces, and stews. Its robust design and stainless steel construction ensure durability and ease of maintenance, while the precise temperature control and even heat distribution guarantee consistent results with every batch. Whether in a bustling restaurant or a food production facility, the Groen PT40 elevates efficiency and quality, making it an indispensable tool for achieving culinary perfection. Groen Jacketed Kettle and Propeller Agitator with: Capacity: 40 gallons Bowl dimensions: Diameter: 26 inches Depth: 24 inches Overall dimensions: Length: 36 inches Width: 42 inches Height: 61 inches Discharge: Flanged Diameter: 1.5 inches Height: 21 inches 2/3 Jacket: MAWP: 25 PSI at 300 degrees fahrenheit Heating method: Direct steam 316 Stainless steel construction Pedestal base Hinged stainless steel cover Propellor-style agitator Motor: 1/3 hp Model: PT 40 Skidding, Rigging, and Loading Fee: $98.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Stainless Steel 150 Gallon Tank with: Tank dimensions: Straight wall depth: 43 inches Diameter: 36 inches Bottom center discharge Stainless steel construction Mounted on casters Skidding, Rigging, and Loading Fee: $92.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used HeatCraft BCH0035LCACZA0200 Condenser with: 11630 BTU per hour (2) Condenser fan motor(s): 1/15 horsepower Refrigerant type: R-404A Removable cabinets Electronic timer Electrical requirements: 208-230 Volts 60 Hz 3 Phase Heavy duty steel construction Model: BCH0035LCACZA0200 Skidding, Rigging, and Loading Fee: $84.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used HeatCraft BCH0035LCACZA0200 Condenser with: 11630 BTU per hour (2) Condenser fan motor(s): 1/15 horsepower Refrigerant type: R-404A Removable cabinets Electronic timer Electrical requirements: 208-230 Volts 60 Hz 3 Phase Heavy duty steel construction Model: BCH0035LCACZA0200 Skidding, Rigging, and Loading Fee: $80.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used GTI 132 Gallon Stainless Steel Insulated Tank with: Capacity: 132 gallons Manhole: Diameter: 12 inches Stainless steel construction Model: unknown Skidding, Rigging, and Loading Fee: $140.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used GTI 132 Gallon Stainless Steel Insulated Tank with: Capacity: 132 gallons Manhole: Diameter: 12 inches Stainless steel construction Model: unknown Skidding, Rigging, and Loading Fee: $140.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Feldmeier Tank: Capacity: approximately 500 gallons Dome top Dish bottom Top mounted manway Bottom center discharge Model: unknown Skidding, Rigging, and Loading Fee: $73.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Mokon Water Chiller with: Maximum fluid temperature: 65°F Refrigerant: R-407C Compressor motor: 10 horsepower Overall dimensions: Length: 37.5 inches Width: 48 inches Height: 80 inches Electrical: 460 volts, 60 Hz, Phase 3 Skidding, Rigging, and Loading Fee: $400.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Mokon Water Chiller with: Maximum fluid temperature: 65°F Refrigerant: R-407C Compressor motor: 10 horsepower Overall dimensions: Length: 37.5 inches Width: 48 inches Height: 80 inches Electrical: 460 volts, 60 Hz, Phase 3 Model: AS4J10JU Skidding, Rigging, and Loading Fee: $473.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Mokon Water Chiller with: Maximum fluid temperature: 65°F Refrigerant: R-407C Compressor motor: 10 horsepower Overall dimensions: Length: 37.5 inches Width: 48 inches Height: 80 inches Electrical: 460 volts, 60 Hz, Phase 3 Skidding, Rigging, and Loading Fee: $368.00
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.