Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Timed
Auction address
424 E Inglefield Rd
Evansville, IN
47725
United States
Industrial Processing & Stainless Steel Tanks Equipment Auction
Mixing • Kettles • Tanks • Chocolate • Brewing • Sanitary Processing
Auction dates
Starts:
Oct 01, 2026 10:00 AM CT
Ends from:
Oct 15, 2026 10:00 AM CT
Viewing dates
By appointment only
|
Auction currency
|
USD |
|
Buyer's premium
|
20 % |
|
Sales tax
|
7 % |
|
Accepted cards
|
There are 113 lots within this auction
Refine results
Filter by
Primary Category
Category
Brand
Item Type
State/Province
Town/City
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used JV Northwest Jacketed Tank Capacity: 1000 gallons Tank dimensions: Straight wall: 8 feet Diameter: 5 feet Agitation: top, bridge mounted Scrape (4) top mounted triclover inlets Bottom center discharge: 3.5 inch triclamp height: 24 inches Jacketed MAWP: 115 psi at 300°F MDMT: 0°F at 115 psi 7.5 horsepower motor Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Overall height: 14 feet Top manway hatch is missing currently Skidding, Rigging, and Loading Fee: $950.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Cleveland Jacketed Kettle with: Model: MKGL-60-T Capacity: 60 gallons Forced air double pass heating system: Output: 190,000 BTU Efficiency: 65% Two-Thirds steam jacket rating: 50 psi Kettle diameter: 29.5 inches Butterfly valve discharge diameter: 3 inches Discharge height: 13.25 inches Powered tilt mechanism Hydraulic agitator, nylon scraper, and bridge lift Solid-State push button controls Insulated heat exchanger Stainless steel two-piece cover with safety screen Overall dimensions: Width: 66.6 inches Depth: 50.5 inches Height: 74 inches 316 stainless steel contact parts Agitation motor: 3 horsepower Electrical: 3 Phase, 60 Hz, 208/240-480 Volts Skidding, Rigging, and Loading Fee: $201.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Hamilton Kettle: Model: SA Capacity: 400 gallons Half jacket: 125 psi at 344°F Double motion agitation: Scrape Counter rotating 3 blade center shaft mixer Dual CIP spray balls Dual lift of lids 3.5 inch bottom center discharge 8 top mounted inlets Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Overall dimensions: 110"H x 66"W Skidding, Rigging, and Loading Fee: $234.40
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
The DC Norris DCN-1 1500 Liter Stainless Steel Fixed Bowl Kettle with Side Mount Orbital Agitator is a powerhouse of efficiency in food processing. Boasting a generous 1500-liter capacity and a robust stainless steel construction, it's designed for durability and hygiene compliance. The side-mounted orbital agitator ensures thorough mixing and heating, ideal for producing a wide range of culinary delights from soups and sauces to confectioneries and more. Elevate your production capabilities with the precision and reliability of the DC Norris DCN-1 Kettle, the cornerstone of your culinary success. Used DC Norris DCN-1 Fixed Bowl Kettle with: Model: DCN-1 Capacity: 1500 Liters approximately 400 gallons Dimensions: Diameter: 57 inches Depth: approximately 67 inches MAWP: 100psi at 338° fahrenheit MDMT: -20° fahrenheit at 100psi Horizontal agitation Hinged lid with grate guarding Discharge: Inside diameter: 3 inches Outside diameter: 3.5 inches Discharge height: 17.5 inches Electrical requirements: 460 Volts 60 Hz 3 Phase Stainless steel construction Skidding, Rigging, and Loading Fee: $514.10
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulated tank Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulated tank Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulation Capacity: 2113 gallons Agitation with drive motor: Motor horsepower: 2HP Electrical requirements: Voltage: 460V Frequency: 60 Hertz Current: 5.59 Amps Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches Rosemount temperature probe and transmitter Rosemount pressure sensor and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Kuipers Woudsend Tank with: Model: 8 Cubic Meter Insulation Capacity: 2113 gallons Design temperature: 100°C Working temperature: 25°C Top mounted hinged manhole One top inlet Dish style top with a cone shaped bottom Bottom center outlet: Approximate discharge height: 52 inches ACC actuator and valve: Electrical requirements: Voltage: 24VDC Frequency: 24VDC Phase: 1 Rosemount temperature probe and transmitter 304 Stainless steel construction with a motor starter switch Overall height: 24 feet Skidding, Rigging, and Loading Fee: $3000.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Lee Kettle with: Model: 80D7T Capacity: 80 gallons National board rated Number: 5390 Multiple top mounted inlets and outlets Jacket MAWP: 90 psi at 332°F MDMT: -20°F at 90 psi Internal MAWP: FV/15 psi at 250°F MDMT: -20°F at 15 psi Overall dimensions: Length: 63 inches Width: 40 inches Height (lid opened): 96 inches Temperature gauge: up to 160° Bottom Center discharge Agitation: side & bottom scrapers Vacuum seal cover Sanitary center bottom discharge at 14" floor clearance Stainless steel construction Mounted on (4) legs stainless steel base Skidding, Rigging, and Loading Fee: $117.20
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Letsch Mix Tank Capacity: 600 gallons High shear Admix Rotosolver agitation Jacket rating: 90 psi at 400° F Hinged manway Multiple top mounted tri clamp ports Bottom center discharge: 3.5 inch tri clamp Dome top dish bottom 15 horsepower motor Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 304 stainless steel construction Skidding, Rigging, and Loading Fee: $950.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Feldmeier Mix Tank: Capacity: approximately 500 gallons Tank dimensions: Straight wall: approximately 46 inches Diameter: approximately 60 inches Overall height: 110 inches Single wall Agitation Top mounted hinged manway 3.5 inch bottom triclamp discharge Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Skidding, Rigging, and Loading Fee: $390.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Walker Stainless Equipment provides sanitary stainless steel tanks, such as the 304 stainless steel, jacketed, dome-top models (PZ) featuring agitation: Model: PZ Capacity: 600 gallons 304 stainless steel Dome top Vessel jacket: PSI: Atmospheric MAWP: 250° F Heat: PSI: 15 MAWP: 250° F Cool: PSI: 100 MAWP: 100° F Clean-in-place spray ball Agitation Top mounted Electrical requirements: 230/460 Volts 60 Hz 3 Phase 2.7/1.35 Amps Last application: ice cream facility Skidding, Rigging, and Loading Fee: $434.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
The 400 Gallon UNK Jacketed Holding Tank is a durable, stainless steel tank designed for the storage and temperature control of liquids. It features a jacketed design that allows for heating or cooling, ensuring optimal product consistency. The tank is ideal for food, pharmaceutical, and chemical industries, where precise temperature regulation is critical. Its 100-gallon capacity makes it a versatile solution for medium-sized production operations. Used 400 Gallon UNK Jacketed Holding Tank with: Capacity: 400 gallons Maximum allowable working pressure: 253 PSI at 300 degrees Fahrenheit Minimum design metal temperature: -20 degrees Fahrenheit at 253 PSI Inside tank dimensions: 49 inch side wall x 50 inch diameter Inlet: 1.5 inch diameter Outlet: 1.5 inch diameter 9 inches from ground Stainless steel construction Skidding, Rigging, and Loading Fee: $204.80
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
The 400 Gallon UNK Jacketed Holding Tank is a durable, stainless steel tank designed for the storage and temperature control of liquids. It features a jacketed design that allows for heating or cooling, ensuring optimal product consistency. The tank is ideal for food, pharmaceutical, and chemical industries, where precise temperature regulation is critical. Its 100-gallon capacity makes it a versatile solution for medium-sized production operations. Used 400 Gallon UNK Jacketed Holding Tank with: Model: 400 Gal Capacity: 400 gallons Maximum allowable working pressure: 253 PSI at 300 degrees Fahrenheit Minimum design metal temperature: -20 degrees Fahrenheit at 253 PSI Inside tank dimensions: 49 inch side wall x 50 inch diameter Inlet: 1.5 inch diameter Outlet: 1.5 inch diameter 9 inches from ground Stainless steel construction Skidding, Rigging, and Loading Fee: $204.80
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Mix Tank: Capacity: 600 gallons Admix high shear mixer Top mounted manway Multiple top mounted tri clamp ports Dome top dish bottom Bottom center discharge: 3.5 inch tri clamp 15 horsepower mixer motor Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Skidding, Rigging, and Loading Fee: $750.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Watson Metal Masters Tank: Single Wall Capacity: approximately 750 gallons Tank dimensions: Straight wall: 62 inches Diameter: 60 inches Top mounted manway Side mounted 3.5 inch triclamp port Bottom center discharge: 3.5 inch triclamp Stainless steel construction Skidding, Rigging, and Loading Fee: $401.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Custom Metalcraft Mix Tank: Model: 310511 Capacity: 678 gallons Jacketed: 100 psi at 200°F Lightnin propeller agitation Hinged manway 3 top mounted tri clamp ports Dome top dish bottom bottom center discharge: 4 inch tri clamp 3.5 horsepower motor Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 316L stainless steel construction Skidding, Rigging, and Loading Fee: $950.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Feldmeier Single Wall Tank with: Capacity: approximately 350 gallons Dome top Top mounted manway Bottom center discharge: 4.75 inch triclamp Single wall Dished bottom Stainless steel construction Unit mounted on four stainless steel legs Skidding, Rigging, and Loading Fee: $201.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used McCarter Chocolate Melt Tank: Capacity: 5000 pounds (Approximately 700 gallons) Tank dimensions: Height: approximately 69 inches Diameter: approximately 56 inches Side and bottom sweep agitation No pressure jacket, open circulation only Dual hinged lid with 3 inlets (2) 4 inch diameter (1) 3 inch diameter Bottom center discharge 2 horsepower agitator motor Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Carbon steel construction Skidding, Rigging, and Loading Fee: $950.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Comat Stainless Steel Tank with: Model: STVS150.1 Tank capacity: 3995 gallons Tank dimensions (inches): Diameter: 92 Height: 144 Discharge dimensions (inches): Flanged diameter: 2.5 Height: 11 Top inlet: 2 inches flanged Manway diameter (inches): Width: 18 (approximately) Height: 12 (approximately) Overall dimensions (inches): Length: 94 Width: 94 Height: 180 Top mounted motor agitation Pitched bottom with center discharge Steam vent Stainless steel construction Last application: cheese Skidding, Rigging, and Loading Fee: $1,050.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Groen Kettle: Model: RA-200 Capacity: 200 gallons Dual hinged lid cover Stainless steel construction Jacketed: Coverage: 2/3 Rated: 45 PSI at 300° F Agitation: Dual center baffles Sweep motion agitator Driven by 2 horsepower, 230/460 volt, 3 Ph, 60 Hz motor 3 Top mounted inlets Bottom center discharge: Inside diameter: 1.75 inches Outside diameter: 2.5 inches Mounted on three pipe style legs Approximate vessel dimensions (inches): 48 diameter x 36 deep Skidding, Rigging, and Loading Fee: $126.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Opple LED-MSL 103-5W Stainless Steel Jacketed Tank with: Model: LED-MSL 103-5W Approximate Gallons: 400 Tank dimensions: Straight wall: 32 inches Inner diameter: 58 inches Outside diameter: 60 inches 2 inch diameter bottom discharge 18 inch diameter manway Coned bottom Side steam inlet/outlets: 1.75 inches Mezzanine platform dimensions: 89 inches wide x 69 inches long Mezzanine walking height from ground: 47 inches Missing top mixing motor Skidding, Rigging, and Loading Fee: $360.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Feldmeier Tank: Capacity: approximately 250 gallons Tank dimensions: Straight wall: 63 inches Diameter: 36 inches Overall height: 108 inches Top mounted hinged manway Side mounted 4.75 inch triclamp port Bottom center discharge: 4.75 inch triclamp Single wall Stainless steel construction Skidding, Rigging, and Loading Fee: $243.70
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Feldmeier Tank: Capacity: approximately 200 gallons Tank dimensions: Straight wall: 50 inches Diameter: 36 inches Overall height: 84 inches Single wall Top mounted hinged manway Top mounted 3.5 inch triclamp port 3 side ports: (2) 4.75 inch triclamp (1) 3.5 inch triclamp Bottom center threaded discharge: 2 inches Stainless steel construction Skidding, Rigging, and Loading Fee: $73.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Mix Tank: Capacity: 600 gallons Low pressure jacket Lightnin mixer propeller agitation Dome top, dish bottom Hinged top mounted manway Multiple top mounted tri clamp ports Bottom center discharge: 3.5 inch tri clamp 3.5 horsepower mixer motor Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Skidding, Rigging, and Loading Fee: $1,250.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Unused Single Wall Tank: Capacity: approximately 750 gallons Straight wall: 75 inches Diameter: 55 inches Top mounted manway Dome top Dish bottom Bottom center discharge Stainless steel construction Skidding, Rigging, and Loading Fee: $360.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Wolf-tec Stainless Steel Jacketed Tank with: Model: PFHT500-002 Capacity: Gallons: 500 Liters: 1892.5 Jacket rating: MAWP: 150 PSI 175º F MDMT -20º F 150 PSI Side and bottom sweep agitation Spray ball CIP Top mounted manway: 17-inch diameter (4) Total top-mounted sanitary inputs: (2) Sanitary inputs: Inside diameter: 2.75 inches Outside diameter: 3.625 inches (1) Sanitary input: Inside diameter: 3.75 inches Outside diameter: 4.75 inches (1) Sanitary input: Inside diameter: 1.325 inches Outside diameter: 2 inches Conical bottom Bottom center discharge: Inside diameter: 2.25 inches Outside diameter: 3 inches Discharge height: approximately 24 inches Push button controls Air requirements: Minimum: 60 PSI Maximum: 80 PSI 1 horsepower motor Electrical requirements: 575 Volts, 60 Hz Phase 3 3.5 Amps 304 Stainless steel construction Skidding, Rigging, and Loading Fee: $700.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
533
Used WM. A. Schmidt And Sons / McCarter Chocolate Melt Tank: Model: TK-36016 Capacity: 15,000 pounds Approximately 1,600 to 1,700 gallons (including headspace). Actual capacity must be verified by manufacturer. Approximate working capacity is 1,400 to 1,500 gallons. Actual capacity must be verified by manufacturer. Jacketed tank previously heated by hot water Sweep agitation Atmospheric pressure jacket Manway access hatch Product infeed chute Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Overall dimensions: Approximately 135"H x 6'D Skidding, Rigging, and Loading Fee: $950.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Insulated Mix Tank: Model: 180RS133 Capacity: 600 gallons Insulated Admix high shear mixer Top mounted manway Multiple top mounted tri clamp ports Dome top dish bottom Bottom center discharge: 3.5 inch tri clamp 15 horsepower mixer motor Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Skidding, Rigging, and Loading Fee: $1,750.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used DCI 600 Gallon Jacketed SS Tank with: Bottom side discharge diameter: 2 inch tri clover Discharge height from ground: 12 inches Stainless steel construction 2 inch fiberglass sidewall insulation Inside tank diameter: 72 inches Outside diameter: 76 inches Design pressure vessel: 100 PSI at -20 to 300 degrees Fahrenheit Estimated empty weight: 2,500 pounds Skidding, Rigging, and Loading Fee: $375.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Merck Insulated Vac Processing Tank with: Vessel capacity: 1,250 liters MAWP: 100 PSI @ 338°F MDMT: -20°F @ 100 PSI Temperature range: Minimum: -20°F Maximum: 338°F Bottom center discharge dimensions: Diameter: 2 inches Height: 16 inches Thickness: Shell: 0.18 inches Head: 0.25 inches Vacuum pressure design: 15 PSI Approximate overall dimensions: Diameter: 40 inches Height: 88 inches 316L stainless steel construction Shell: 11 gauge steel Head: 14 gauge steel Skidding, Rigging, and Loading Fee: $157.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Groen 60 Gallon Jacketed Steam Kettle with: Model: FT-60 Capacity: 60 gallons Maximum working pressure: 25 psi at 300° fahrenheit Hinged top 3-Pipe style legs Stainless steel construction Discharge diameter: 2 inches Overall dimensions: Diameter: 31 inches Height: 39 inches Skidding, Rigging, and Loading Fee: $90.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Groen Kettle: Model: TA 40 SP Capacity: 40 gallons National board number: 52700 Jacketed: Coverage: 2/3 Rated: 125 PSI at 353° Fahrenheit Dual agitation Baffle Inlet diameter: 1.25 inches Bottom center discharge diameter: 2 inches Dual half lift-off cover Stainless steel construction Skidding, Rigging, and Loading Fee: $66.70
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Groen Pressure Kettle with: Model: INA-200 Capacity: 200 gallons MAWP: 125 psi @ 353° F Bottom center flanged discharge: Diameter: 2.25 inches Height from floor: 23.5 inches Side bottom outlet diameter: 2.25 inches Half jacketed Jacket inlet diameter: 1.5 inches Dish bottom Top mounted paddle agitation Side scrape Overall dimensions: Diameter: 48 inches Height: 104 inches Mounted on painted steel frame 316 stainless steel construction Motor: 2 horsepower Electrical: 3 Phase, 60 Hz, 550 Volts Previously used in bakery application Skidding, Rigging, and Loading Fee: $158.70
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Crepaco Tank: Model: B Capacity: Approximately 200 gallons Top mounted hinged manway: 18 inch diameter Side and bottom sweep agitation Bottom center sanitary discharge: Inside diameter: 2.75 inches Outside diameter: 3.5 inches Discharge height: 20.75 inches Motor: 1/.5 HP Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Skidding, Rigging, and Loading Fee: $160.20
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Feldmeier Tank: Capacity: approximately 500 gallons Dome top Dish bottom Top mounted manway Bottom center discharge Skidding, Rigging, and Loading Fee: $148.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Brine Mixing Tank with Bottom Scrape Agitation and Mezzanine with: Capacity: 150 gallons Diameter: 33 inches Depth: 56 inches Agitation: top down shear Overall dimensions: Length: 87 inches Width: 71 inches Height: 120 inches Dish bottom Product loading zone Touch screen controls Stainless steel construction Agitator motor: 7.5 HP Recirculating pump motor: 7.5 HP Motor electrical: 208~230/460 V, 60 Hz, Three phase Last application: mixing brine for meat injection Skidding, Rigging, and Loading Fee: $596.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Smio 1600 Liter Stainless Steel Tank with: Model: Fondoir 1600L Capacity: 1600 liters Tank dimensions: Diameter: 60 inches Straight wall height: 52 inches Side scrape agitation Dual hinged lid Discharge diameter: 3 inches Stainless steel construction Electrical requirements: 480 volts, 60 hertz, 3 phase Skidding, Rigging, and Loading Fee: $300.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Groen Jacketed Kettle with: Model: DH/1-40 Capacity: 40 gallons Input: 100,000 BTU per hour MAWP: 50 PSI @ 300° F MDMT: -20° F @ 50 PSI Manifold gas pressure: 3.5 inches of water column Distilled water jacket Analog controls Savage Bros digital temperature unit Manual tilt discharge Overall dimensions: Width: 50 inches Depth: 49 inches Height: 43 inches Stainless steel construction Electrical: 1 Phase, 60 Hz, 115 Volts Skidding, Rigging, and Loading Fee: $108.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Smio 1600 Liter Stainless Steel Tank with: Model: Fondoir 1600L Capacity: 1600 liters Tank dimensions: Diameter: 60 inches Straight wall height: 52 inches Side scrape agitation Dual hinged lid Discharge diameter: 3 inches Stainless steel construction Electrical requirements: 480 volts, 60 hertz, 3 phase Skidding, Rigging, and Loading Fee: $280.20
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Legion Utensils Company 60 Gallon Stainless Steel Steam Kettle with: Model: 266 Capacity: 60 gallon Hinged top 3-Pipe style legs Stainless steel construction Discharge diameter: 2 inches Bowl dimensions: Diameter: 31 inches Depth: 24 inches Skidding, Rigging, and Loading Fee: $120.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 500 Gallon Single Wall Holding Tank with: No OEM tag Tank dimensions: 48" straight wall x 60" diameter Side discharge port: 4" 9" from floor Skidding, Rigging, and Loading Fee: $216.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Legion Stainless Steel Kettle with: Capacity: approximately 30 gallons Kettle diameter: 23 inches Two-Thirds jacketed Overall dimensions (inches): Length: 31 Width: 25.5 Height: 50 Discharge height: 15 inches Bottom-side discharge Dish-style Lightnin XDA-33 agitator: 0.3 HP Pneumatic 1750 max RPM 0.5 inch shaft diameter Stainless steel construction Skidding, Rigging, and Loading Fee: $80.70
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Lee Jacketed Tank with: Model: 100LU Capacity: approximately 25 gallons Jacket pressure rating: MAWP: 100 PSI @ 338° F MDMT: -20° F @ 100 PSI Vessel pressure rating: MAWP: 30 PSI @ 300° F MDMT: -20° F @ 30 PSI Top mounted inlet diameters: (4): 2 inches (1): 3.5 inches Internal tank dimensions: Diameter: 18 inches Depth: 25 inches Approximate overall dimensions: Width: 48 inches Depth: 48 inches Mounted on casters Stainless steel construction Skidding, Rigging, and Loading Fee: $72.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 50 Gallon Insulated Cherry Burrell Holding Tank with: The 50 Gallon Cherry Burrell Holding Tank is designed for safely storing and maintaining liquids at a consistent temperature in various industrial applications. Constructed with durable materials, it ensures long-lasting performance and resistance to wear in demanding environments. The tank features an efficient design for easy integration into production lines and is ideal for holding liquids before further processing. With a 50-gallon capacity, it provides reliable storage and control for fluid management in food, beverage, and other industries. Capacity: 50 gallons Interior tank dimensions: 22 inch diameter x 32 inches tall 16 inch diameter swing open manway Bottom discharge: 1.5 inches Stainless steel construction (4) 1.5 inch diameter tubular feet Approximate total height: 55 inches Skidding, Rigging, and Loading Fee: $126.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used GTI 132 Gallon Stainless Steel Insulated Tank with: Capacity: 132 gallons Manhole: Diameter: 12 inches Manual butterfly valve discharge Stainless steel construction Skidding, Rigging, and Loading Fee: $90.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used GTI 132 Gallon Stainless Steel Insulated Tank with: Capacity: 132 gallons Manhole: Diameter: 12 inches Manual butterfly valve discharge Stainless steel construction Skidding, Rigging, and Loading Fee: $78.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Experience culinary precision with the Groen PT40 Kettle featuring a dynamic propeller agitator. Crafted for culinary artisans and industrial kitchens alike, this kettle excels in efficiently blending, cooking, and simmering large volumes of soups, sauces, and stews. Its robust design and stainless steel construction ensure durability and ease of maintenance, while the precise temperature control and even heat distribution guarantee consistent results with every batch. Whether in a bustling restaurant or a food production facility, the Groen PT40 elevates efficiency and quality, making it an indispensable tool for achieving culinary perfection. Groen Jacketed Kettle and Propeller Agitator with: Model: PT 40 Capacity: 40 gallons Bowl dimensions: Diameter: 26 inches Depth: 24 inches Overall dimensions: Length: 36 inches Width: 42 inches Height: 61 inches Discharge: Flanged Diameter: 1.5 inches Height: 21 inches 2/3 Jacket: MAWP: 25 PSI at 300 degrees fahrenheit Heating method: Direct steam 316 Stainless steel construction Pedestal base Hinged stainless steel cover Propellor-style agitator Motor: 1/3 hp Skidding, Rigging, and Loading Fee: $98.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used ICOSS Tank: Capacity: 425 gallons Jacketed: MAWP: 253.8 psi at 300°F MDMT: -20°F at 253.8 psi Sidewall inlets/outlets: 1.5 inch ID Bottom outlets: 2 inch ID Side mounted powder blending skid Electrical: Volts: 230/460 Frequency: 60 Hz Phase 3 Stainless steel construction Skidding, Rigging, and Loading Fee: $237.50
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Stainless Steel 150 Gallon Tank with: Tank dimensions: Straight wall depth: 43 inches Diameter: 36 inches Bottom center discharge Stainless steel construction Mounted on casters Skidding, Rigging, and Loading Fee: $92.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Sani-Matic 20 Gallon Stainless Steel Brew Hopper with: Working capacity: 20 gallons Number of tanks: 2 Operating pressure: 6 bar Control air pressure: 6 to 8 bar Cone drive ratio: 5:1 Waukesha Cherry-Burrell pump: 3 horsepower Mounted on stainless steel frame Stainless steel construction Electrical requirements: 208-230/460 volts, 60 hertz, 3 phase Skidding, Rigging, and Loading Fee: $220.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Lehui Brite Tank with: Capacity: 7 BBL Approximately 200 gallons Jacket pressure rating: MAWP: 0.39 MPa @ 60° C MDMT: -30° C @ 0.39 MPa Shell pressure rating: MAWP: 0.3 - 0.002 MPa @ 60° C MDMT: -30° C @ 0.3 MPa Manway dimensions: Width: 17 inches Height: 13.5 inches Top inlet: Flanged diameter: 2.5 inches Interior diameter: 1.75 inches Side bottom ports (2): Flanged diameter: 2 inches Interior diameter: 1.25 inches Jacket inlet diameter: 1 inch Bottom center discharge: Flanged diameter: 2 inches Interior diameter: 1.25 inches Discharge height: 4 inches Straight side height: 55 inches Shell diameter: 37 inches Overall dimensions: Diameter: 44 inches Height: 84 inches Stainless steel construction Skidding, Rigging, and Loading Fee: $126.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used FBM Tempering Kettle with: Model: Compatta Throughput: up to 90 kilograms per hour depending on product and application Bowl capacity: 15 kilograms Night cycle Overall dimensions: Width: 500 mm Depth: 680 mm Height: 1,470 mm Mounted on casters Stainless steel construction Power: 1,600 kW Skidding, Rigging, and Loading Fee: $96.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Belshaw Icer with: Model: HI24 Capacity: up to 36 donuts per cycle, depending on size and application Push button controls Approximate overall dimensions: Length: 31 inches Width: 39 inches Height: 42 inches Mounted on casters Stainless steel construction Electrical: 1 Phase, 60 Hz, 120 Volts Skidding, Rigging, and Loading Fee: $90.00
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Belshaw Icer with: Model: HI24 Capacity: up to 36 donuts per cycle, depending on size and application Push button controls Approximate overall dimensions: Length: 31 inches Width: 39 inches Height: 42 inches Mounted on casters Stainless steel construction Electrical: 1 Phase, 60 Hz, 120 Volts Skidding, Rigging, and Loading Fee: $90.00
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.