Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Timed
Auction address
7350 Commerce Lane
Fridley, MN
55432
United States
Massive Bakery Auction: Mixing, Baking, and Packaging Equipment
Auction dates
Starts:
Jan 01, 2025 10:00 AM CT
Ends from:
Jan 15, 2025 10:00 AM CT
Viewing dates
By appointment only
|
Auction currency
|
USD |
|
Buyer's premium
|
18 % |
|
Sales tax
|
8.13 % |
|
Accepted cards
|
There are 116 lots within this auction
Refine results
Filter by
Primary Category
Category
Brand
Item Type
State/Province
Town/City
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Overhead Dough Powder Hopper System with: 4 bolt ceiling hung design Hopper vibrators Top mount rigging hooks with 2" diameter holes Approximate top infeed diameter: 2.5" Approximate discharge diameter: 3.5"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Sancassiano Mixing System with: Four (4) carousel style bowl mixing stations with two (2) San Cassiano mixers (2) San Cassiano mixers (2) spiral hooks and (1) 2" wide mixing blade with 4" diameter shaft Bowl dimensions: 43" diameter x 43" deep (stainless steel) Rotating bowls Stainless steel bowls Fully enclosed lid when mixing
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 10 bowl receiving station for mixed product Bowl capacity approximately 150 gallons Transfer bowl dimensions: 47" diameter x 24" deep Approximate dump height: 95" from ground 10 bowls included Stainless steel bowls
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Rheon Stress Free V4 Dough Feeder with: Rheon’s unique V4 Stress Free® system allows bread manufactures to create damage-free dough during the forming process – with negative stress on the dough. With the unique Gravimetric® Method, our dough dividing and weighing units accurately portions the dough sheet at a desired weight or length. Dough block supply infeed hopper: 38" long x 13" wide Discharge belt: approximately 19.5" wide Hopper capacity: 70 liters Overhead infeed conveyor 8" wide x 21" tall discharge height from ground: 35" Forming and feeding continuous dough sheet with steady thickness and width Touchscreen controls with emergency E stop Stainless steel construction
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Rheon Stress Free V4 Dough Feeder with:
Rheon’s unique V4 Stress Free® system allows bread manufactures to create damage-free dough during the forming process – with negative stress on the dough. With the unique Gravimetric® Method, our dough dividing and weighing units accurately portions the dough sheet at a desired weight or length.
Dough block supply infeed hopper: 38" long x 13" wide
Discharge belt: approximately 19.5" wide
Hopper capacity: 70 liters
Overhead infeed conveyor
8" wide x 21" tall
discharge height from ground: 35"
Forming and feeding continuous dough sheet with steady thickness and width
Touchscreen controls with emergency E stop
Stainless steel construction
Used Rheon Cross Roller with Sheeting Conveyor System with:
Flour feeder: 6" long x 30" wide
Flour feeder height from ground: 55"
High speed stretcher
Sheeter conveyor dimensions: 31.5" wide x 11' long
Electrical requirements: 220/208 volts
Used Rheon 39" Wide x 24' Long Dough Sheeter with:
Conveyor dimensions: 39" wide x 24' long
(2) two top belt flatteners:
each 10" wide x 21" long
Top belt flattener: 38" wide x 63" long
Electrical requirements: 220 volts / 60 hertz / 1.8 A
Approximate overall dimensions: 26' long x 5' wide
Used Smooth Top Flat Belt Conveyor Transfer System with:
First conveyor section: 4' long x 39" wide
Second Conveyor section: 5' long x 39" wide
Working height from ground: approximately 32"
(2) two flour dusters top mounted
Variable speed controller
On/off switch
Emergency E stop
Electrical requirements: 230 volts / 3 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Rheon Cross Roller with Sheeting Conveyor System with:
Flour feeder: 6" long x 30" wide
Flour feeder height from ground: 55"
High speed stretcher
Sheeter conveyor dimensions: 31.5" wide x 11' long
Electrical requirements: 220/208 volts
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Rheon 39" Wide x 24' Long Dough Sheeter with:
Conveyor dimensions: 39" wide x 24' long
(2) two top belt flatteners:
each 10" wide x 21" long
Top belt flattener: 38" wide x 63" long
Electrical requirements: 220 volts / 60 hertz / 1.8 A
Approximate overall dimensions: 26' long x 5' wide
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Smooth Top Flat Belt Conveyor Transfer System with:
First conveyor section: 4' long x 39" wide
Second Conveyor section: 5' long x 39" wide
Working height from ground: approximately 32"
(2) two flour dusters top mounted
Variable speed controller
On/off switch
Emergency E stop
Electrical requirements: 230 volts / 3 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 12' Long x 38" Wide Smooth Top Dough Transfer Conveyor with:
Conveyor dimensions: 14' long x 38" wide
Discharge section: 2' long x 38" wide
Infeed/working height from ground: 40"
Discharge height from ground: 34"
Stainless steel construction
Adjustable leveling feet
Belt tensioner
Electrical requirements: 208 volts
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Gouet Proof Box: 8 sections of 8 conveyor lanes Width: 6 inches Flight: 13 inches Lug height: 1.5 inches
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Hydronic CCM 85 CTA Air Handling Unit with:
Output: 120 Watts
Q Nominal 2.36
Humidification efficiency:
60%: 25
80%: 33
90%: 36
Electrical specification: 480 volts
Approximate overall dimensions: 61" wide x 9.5' tall x 8' long
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Hydronic CCM 85 CTA Air Handling Unit with:
Output: 120 Watts
Q Nominal 2.36
Humidification efficiency:
60%: 25
80%: 33
90%: 36
Electrical specification: 480 volts
Approximate overall dimensions: 61" wide x 9.5' tall x 8' long
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Hydronic CCM 85 CTA Air Handling Unit with: Output: 120 Watts Q Nominal 2.36 Humidification efficiency: 60%: 25 80%: 33 90%: 36 Electrical specification: 480 volts Approximate overall dimensions: 61" wide x 9.5' tall x 8' long
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used ABI LTD Robotic Scoring System Type 4 with: Katana Robotic Scoring combines robotics and advanced vision systems, to facilitate pin-point accuracy and deliver uniform scoring to every piece of dough. This completely flexible robotic scoring solution combines unique End of Arm Tools with a precise 3D vision system, optimized robotic programming for the robot’s movement with an intuitive Human Machine Interface (HMI). All these combined create the most comprehensive/flexible scoring system available in the market. (2) two ABB series 3 axis robots (3) three pan conveyor belts 19' long x 8" wide total width: 45" working height: 32" from ground Duster hopper: 45" x 10" Light stand Full enclosed system 240 volts / 3 phase / 60 hertz
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 24" Total Width Pan Transfer Conveyor Flat Belt with: Conveyor dimensions: individual belt width: 3.5" total width: 24.5" total length: approximately 47' long working height: 32" from ground Emergency push stop Adjustable leveling feet
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 90 Degree Pan Transfer Conveyor with: Belt dimensions: 33" total width 110" total length 1/4 horsepower motor Adjustable leveling feet
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Walk Over Platform with: Step dimensions: 24" wide x 7.5" deep Platform height: 50" from ground Platform dimensions: 48" x 24" Handrail height: 32"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
13' wide x 100' long Gouet Oven
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Walk Over Platform with: Step dimensions: 24" wide x 7.5" deep Platform height: 50" from ground Platform dimensions: 48" x 24" Handrail height: 32"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 24" Wide Pan Transfer Conveyor Belt with: Belt widths: 3.5" Total working belt width: 24" Working height from ground: 32" Total conveyor length: 7' 1/4 horsepower motor
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used The Henry Group P9600 Peel Board Cleaner with:
Conveyor belt dimensions:
29" wide
plastic grip centers: 2"
plastic grip width: 3"
Master safety relay tripped light
Motor overload light
Infeed safety eye light
Manual/automatic operating mode
Master safety relay reset
1 horsepower motor
Electrical requirements: 230/460 volts / 60 hertz / 3 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 24.5" Wide Pan Transfer Conveyor with: Conveyor dimensions: 24.5" total width each belt is 3.25" wide total length: 8' Approximate working height from ground: 32" Motor: 1/4 horsepower
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Walk Over Platform with: Step dimensions: 24" wide x 7.5" deep Platform height: 50" from ground Platform dimensions: 48" x 24" Handrail height: 32"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Walk Over Platform with: Step dimensions: 24" wide x 7.5" deep Platform height: 50" from ground Platform dimensions: 48" x 24" Handrail height: 32"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 36 Wide Lineshaft Roller Conveyor 180" long with: Roller specifications: 4" centers 2" diameter 36" wide x 180" long Approximate working height: 33" from ground
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Fanuc M-410ib 160 Robotic Palletizer with: The Fanuc M‑410iB/160 is one of the latest-generation palletizing robots engineered to produce high-quality work with its precision, high-speed, and high-payload offerings robot. It features a 160kg payload and delivers high-speed performance, with one of the fastest cycle times and payloads in its class. Maximum payload: 160 kilograms Reach: 3,140 millimeters 4 Axes Structure: articulated Repeatability: 0.5 millimeters Floor mounted Controller included Electrical specifications: 480 volts
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Flour Dispenser with: Conveyor dimensions: 4' long x 32" Approximate working height: 32" from ground Hopper dimensions: 30" x 2.5"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 17' Long x 36" Wide Plastic Mat Top Conveyor with: Conveyor dimensions: 17' long x 36" wide Infeed height from ground: 33" Outfeed height from ground: 36" 1/4 horsepower motor Stainless steel frame
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Transfer Conveyor Belt with: Conveyor dimensions: 60" long x 36" wide Working height from ground: 32" 2 horsepower conveyor
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 36 inch wide IJ spiral cooling conveyor: Belt width: 36 inches Working height: 9 inches Infeed height: 42 inches Outfeed height: approx 27 feet
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used BMI 34" Wide x 75" Long Plastic Mat Top Conveyor with: Conveyor dimensions: 34" wide x 75" long Approximate working height: 32" Plastic mat top Stainless steel frame Adjustable tensioner 1/4 horsepower conveyor
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used LeMatic GU9W Hard Roll Bread Slicer with: Production rate: up to 800 pieces per minute (based on 4" diameter roll) Capable of slicing 6 hearth style sandwich rolls Belt dimensions: 34" wide Frame width: 42" wide # of knife spindles: 5 Wash down construction Floating top conveyor Adjustable slicing height Conveyor horsepower: .75 Stainless steel construction Electrical requirements: 480 volts / 60 hertz / 3 phase / 6.7 amps
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used BMI 32" Wide x 55" Long Plastic Mat Top Conveyor with: Conveyor dimensions: 32" wide x 55" long Approximate working height: 32" from ground 3/4 horsepower motor
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
800 Esey Blast Freezer with:
Conveyor width: 35 inches
Height: 16 inches
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 36" Wide x 90" Long 90 Degree Steel Wire Mesh Conveyor with: Conveyor dimensions: 36" wide x 90" long Working height from ground: 32" Stainless steel construction Adjustable leveling feet 1/4 horsepower motor
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Mettler Toledo X360B X Ray Metal Detector with:
Maximum product width: 580 millimeters
Maximum product height: 300 millimeters
Maximum throughput: 1,000 parts per minute
Diode size: 0.4 and 0.8 millimeters
Compatible software: ProdX
HMI: 15.6" touch screen
Conveyor belt dimensions: 85" long x 35" wide
Working height from ground: 39"
Stainless steel construction
Electrical requirements: 120 volts / 50/60 hertz
belt width: 35 in
length: 85 in
working height: 39 in
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 90 Degree Plastic Mat Top Conveyor with: (3) three plastic mat top belts Belt widths: 8" 12" 12" Total conveyor length: 30' infeed section: 4' outfeed section" 26' Working height: 32" from ground 1/2 horsepower motor
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 32" Wide Plastic Mat Top Belt with:
(3) three conveyor sections
Conveyor widths:
8"
12"
12"
Working height from ground: 116"
Top blue belt transfer conveyor: 65" long x 7" tall
Stainless steel frame
1/4 horsepower motor
blue bell transfer conveyors = 7 in tall x 65 in long
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 33" Wide Cleated Inclined Conveyor with:
Belt dimensions: 33" wide
infeed: 9' long
outfeed: 7' long
Cleat centers: 18"
Cleat dimensions:
30" wide x 2" tall
Infeed height from ground: 44"
Discharge height from ground: 80"
Stainless steel frame
1/2 horsepower motor
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 9" Wide x 70" Long Smooth Top Conveyor with:
Conveyor dimensions: 9" wide x 70" long
Discharge height from ground: 76"
Infeed height from ground: 44"
Hopper dimensions: 10" x 10"
Stainless steel frame
Motor horsepower: 1/4 horsepower
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 45" Long x 47" Wide Plastic Mat Top Conveyor with: Conveyor dimensions: 40" long x 36" wide Side guide rails: 3" tall 1/4 horsepower conveyor Overall dimensions: 45" long x 40" wide x 73" tall
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 32" Wide Bread Hopper with: Conveyor dimensions: 32" wide x 87" long Platform dimensions: 36" x 9" Mezzanine platform: 28" step heights
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used OK International Corp Superformer 1 Tape Case Erector with: The Superformer SF1 erects RSC cases, folds the bottom flaps and closes them with tape. Unique features of this machine include stainless steel exterior finish, automatic case squaring system, easy size change, tape and case monitoring. 2" bottom seal tape head Case size ranges: minimum: 8" long x 8" wide x 6" tall maximum: 24" long x 20" wide x 24" tall 40" long belt magazine Stainless steel construction PLC controls Air requirements: 80-100 psi, 1/2" supply line Electrical requirements: 480 volts / 3 phase / 60 hertz
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used OK International C290 98 Bag Inserter with:
Web width: 26"
Stainless steel construction
Electrical requirements: 480 volts
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 90 Degree Line Shaft Roller Conveyor with:
Conveyor dimensions: 22" wide x 84" long
Roller dimensions:
3" centers
2" diameter
Conveyor working height from ground: 25"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 18" Wide x 90" Long Lineshaft Roller Conveyor with:
Conveyor dimensions: 90" long x 18" wide
Working height: 22" from ground
2" roller diameter
3" roller centers
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 19" Wide x 22' Long Lineshaft Roller Conveyor with:
Conveyor dimensions: 19" wide x 22' long
Working height from ground: 20"
3" roller centers
2" roller diameter
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 22" Wide x 12' Long Line Shaft Roller Conveyor with:
Conveyor dimensions: 22" wide x 12' long
Roller diameters:
2" to 2.5"
3" centers
Working height from ground: 25"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Combi TBF Top 2" Top Tape Case Taper with:
2" top tape head
Case dimensions:
Minimum: 8 inches long x 8 inches wide x 5 inches tall
Maximum: 20 inches long x 20 inches wide x 24 inches tall
EZ adjust changeover system
EZ load walk-in case magazine
Electrical requirements: 110 volts / 15 amps / 60 hertz / 1 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Thermo Scientific Ramsey 18" Wide Versa 2 Belt Checkweigher with:
Maximum weighing capacity: 45 kilograms
Output: up to 250 packages per minute
Product types: cartons, bags, cups, bottles, jars, pouches, and boxes
Product dimensions:
25 mm to 500 mm long
maximum width: 400
(2) two belt smooth top conveyors
Infeed/weigh belt dimensions:
18" wide x 22" long
Outfeed/discharge belt dimensions:
18" wide x 22" long
Push arm reject
Air requirements: 120 PSI Max
Electrical requirements: 120 volts / 50/60 hertz / 1 phase
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 21.5" Wide x 107" Wide Lineshaft Roller Conveyor with: Conveyor dimensions: 21.5" wide x 107" long Roller dimensions: 21.5" wide Roller centers: 3" Working height from ground: 30"
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used CTM Labeling 3600a-PA Print and Apply Label Applicator with: If you’re looking for a print and apply application solution for your business or facility, look no further than the 3600a-PA Printer Applicator by CTM Labeling Systems. The machine can be mounted in various positions to apply labels to the tops, sides or bottoms of a wide range of products. The 3600a Printer Applicator is highly versitile and configurable to fit your needs. Label sizes: minimum sato: 1" wide x 1/4" long maximum sato: 6.5" wide x 10" long minimum zebra: 1/2" wide x 1/2" long maximum zebra: 1/2" wide x1/2" long Printing methods: thermal transfer and direct thermal Air requirements: 90 PSI / 3-5 cfm Electrical requirements: 115 volts / 50/60 hertz / 5 amps
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ryson Spiral Conveyor with: Conveyor width: 16.5 inches Overall dimensions: Length: 72 inches Width: 72 inches Height: 120 inches
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Formi 300 AR2 400 Quart Bowl Planetary Mixer with: Bowl capacity: 400 quarts Mixing bowl dimensions: 42" deep x 20" diameter Stainless steel mixing bowl Electrical requirements: 208 volts / 60 hertz Approximate overall dimensions: 45" long x 84" wide x 96" tall
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used Farr Camfill Air Pollution Control Dust Collector with: Number of air filters: 4 Application data: ambient Air volume: 2,900 CFM Static pressure: 14.00" w.g. Air to cloth ratio: 2.31:1 Dust type: bread Button discharge height from ground: 51" Discharge diameter: 12" Approximate overall dimensions: 43" wide x 100" long x 180" tall
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 10" Wide Cleated Inclined Blue Belt Conveyor with:
Conveyor dimensions: 10" wide x 20' long
Cleat specifications:
1" centers
.125" tall
Infeed height from ground: 4"
Discharge height from ground: 130"
Stainless steel frame
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 14" Wide x 9' Long Blue Belt Elevated Conveyor with:
Approximate conveyor dimensions: 14" wide x 9' long
Elevated ceiling mounts
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used 45.5" W x 92" L Blue Belt Inclined Conveyor with: Conveyor dimensions: Infeed height from ground: 61" Infeed length: 72" Outfeed length: 90" Discharge height from ground: 120" Top hold down belt dimensions: 92" long x 45.5" wide (3) three washdown motor Approximate overall dimensions: 165" long x 57" wide x 125" tall
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used KleenLine Corporation Hopper with: Infeed height from ground: 109" Discharge height: 67" Hopper dimensions: 47" wide x 38" long Discharge gate dimensions: 18" long x 18" wide Emergency e stop controller Approximate overall dimensions: 56" wide x 81" long x 109" tall
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Used AM Manufacturing Round O Matic R-900LC Dough Rounder with: Product size output: 1 to 32 ounces Infeed height from ground: 44" Discharge height from ground: 36" Distance between cleats: 1" Discharge conveyor dimensions: 40" long x 8" wide Rotating drum and screw Start/lock/stop push buttons Electrical requirements: 480 volts / 3 phase / 60 hertz Approximate overall dimensions: 67" wide x 26" long x 47" tall
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.